A zinc rich, Two-component, Polyamide-cured epoxy Primer.
Characteristics
• Complies with requirements of SSPC-Paint 20, Level 1 with zinc content ≥85%
by weight in dry film
• Complies with requirements of ISO 12944 in corrosivity category C5.
• Excellent cathodic protection properties for carbon steel.
• Recommended for Industrial and marine Environment.
• Excellent workability and Quick-drying properties.
• Can be used as a single system.
• Over coated with SAMCO mid Epoxy coats to build the recommended paint system.
Physical properties.
Colour Gray
Texture Flat
Mixing and application Information
Number of components Two
Mixing ratio By Volume, base to hardener: 80 / 20
Specific gravity Approx. 2.80 g/ml
Volume solids 55±2% Tested acc. ASTM D 2369
VOC Approx. 390 g/liter
Flashpoint >25°C
spray Airless spray Recommended
Pressure at nozzle: 180 - 250 bar. Nozzle size: 0.41 - 0.58 mm.
Spray angle: 40 - 80 degrees.
Volume of thinner: 0 - 5%.
Convention Air spray- not recommended.
Brush Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%
Roller Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%.
Thinner/Cleaner SAM Thinner No. 1
The two components shall be mixed first before any thinning is
incorporated, if required.
Pot life 120 min at 25 Cº
