FInishes

Sam Epoxy Finish Coat

A gloss, Two-component, Polyamide modified Epoxy coat.
Characteristics
• Good resistance to atmospheric exposure conditions.
• Excellent chemical resistant.
• For marine and Industrial Environment
• For Interior and Exterior use.
• Excellent color and gloss retention
• Excellent workability

Physical properties:

Color RAL colour standard
Texture Gloss
other texture grades semi-gloss and matt are available

Mixing and application Information:

Number of components Two
Mixing ratio By Volume, base to hardener: 80 / 20
Specific gravity Approx. 1.35 g/ml
Volume solids 62±2% Tested acc. ASTM D 2369
VOC Approx. 370 g/l
Flash point >25°C
Spray Airless spray Recommended
Pressure at nozzle: 120 - 150 bar. Nozzle size: 0.38 – 0.53mm.
Spray angle: 40 - 80 degrees.
Volume of thinner: 0 - 5%.
Convention Air spray
Volume of thinner: 0 - 10%.
Brush Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%
Roller Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%.
Thinner/Cleaner SAM Thinner No. 1
Thinning should only be added after the two components have
been thoroughly mixed.
Pot life 60 min at 25 Cº

PRODUCT DATA SHEET

Sam Polyurethan Finish-EC

Product description.

A semi- gloss, Two-component, Aliphatic acrylic polyurethane finish.
Characteristics
• Excellent resistance to atmospheric exposure conditions.
• Excellent chemical resistant.
• For marine and Industrial Environment
• For Interior and Exterior use.
• Excellent color with semi- gloss retention
• Excellent workability

Physical properties.
Colour RAL colour standard
Texture Semi-Gloss
other texture grades - matt are available

Mixing and application Information
Number of components Two
Mixing ratio By weight, base to hardener: 90 / 10
Specific gravity Approx. 1.3 g/ml
Volume solids 57±2% Tested acc. ASTM D 2369
VOC (Supplied) Approx. 410 g/l
Flashpoint >24°C
spray Airless spray Recommended
Pressure at nozzle: 120 - 150 bar. Nozzle size: 0.38 – 0.53mm.
Spray angle: 40 - 80 degrees.
Volume of thinner: 0 - 5%.
Convention Air spray
Volume of thinner: 0 - 10%.
Brush Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%
Roller Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%.
Thinner/Cleaner SAM Thinner No. 2
Thinning should only be added after the two components have
been thoroughly mixed.
Pot life 60 min at 25 Cº

PRODUCT DATA SHEET

Sam Polyurethan Finish 60 HS

A gloss, Two-component, High build, Aliphatic acrylic polyurethane finish.

Characteristics
• Excellent resistance to atmospheric exposure conditions.
• Excellent chemical resistant.
• Designed for marine and Industrial Environment
• Designed for Interior and Exterior use.
• Excellent color and gloss retention
• Excellent workability

Physical properties.
Colour RAL colour standard
Texture Gloss

Mixing and application Information
Number of components Two
Mixing ratio By weight, base to hardener: 86 / 14
Specific gravity Approx. 1.35 g/ml
Volume solids 60±2% Tested acc. ASTM D 2369
VOC (Supplied) Approx. 390 g/l
Flashpoint >24°C
spray Airless spray Recommended
Pressure at nozzle: 120 - 150 bar. Nozzle size: 0.38 – 0.53mm.
Spray angle: 40 - 80 degrees.
Volume of thinner: 0 - 5%.
Convention Air spray
Volume of thinner: 0 - 10%.
Brush Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%
Roller Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%.
Thinner/Cleaner SAM Thinner No. 2
Thinning should only be added after the two components have
been thoroughly mixed.
Pot life 60 min at 25 Cº

Recommended film thickness range
Dry film thickness per coat (µm) 50 – 100 µm ASTM D1186
Wet film thickness per coat (µm) 83 – 166 µm ASTM D1212
Theoretical spreading rate (m2/L) 12 – 6 m²/L

PRODUCT DATA SHEET

Sam Polyurethan Finish Plus

A high gloss, Two-component, Aliphatic acrylic polyurethane finish.

Physical properties.
Colour RAL colour standard
Texture High-Gloss
other texture grades Gloss and Semi-Gloss are available.

Mixing and application Information
Number of components Two
Mixing ratio By weight, base to hardener: 80 / 20
Specific gravity Approx. 1.25 g/ml
Volume solids 55±2% Tested acc. ASTM D 2369
VOC (Supplied) Approx. 440 g/l
Flashpoint >24°C
spray Airless spray Recommended
Pressure at nozzle: 120 - 150 bar. Nozzle size: 0.38 – 0.53mm.
Spray angle: 40 - 80 degrees.
Volume of thinner: 0 - 5%.
Convention Air spray
Volume of thinner: 0 - 10%.
Brush Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%
Roller Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%.
Thinner/Cleaner SAM Thinner No. 2
Thinning should only be added after the two components have
been thoroughly mixed.
Pot life 60 min at 25 Cº

Recommended film thickness range
Dry film thickness per coat (µm) 30 – 50 µm ASTM D1186
Wet film thickness per coat (µm) 55 – 91 µm ASTM D1212
Theoretical spreading rate (m2/L) 18 – 11 m²/L

PRODUCT DATA SHEET

Sam Polyurethan Finish

A high gloss, Two-component, Aliphatic acrylic polyurethane finish.

Physical properties.
Colour RAL colour standard
Texture High-Gloss
other texture grades semi-gloss and matt are available.

Mixing and application Information
Number of components Two
Mixing ratio By weight, base to hardener: 85 / 15
Specific gravity Approx. 1.25 g/ml
Volume solids 55±2% Tested acc. ASTM D 2369
VOC (Supplied) Approx. 442 g/l
Flashpoint >24°C
spray Airless spray Recommended
Pressure at nozzle: 120 - 150 bar. Nozzle size: 0.38 – 0.53mm.
Spray angle: 40 - 80 degrees.
Volume of thinner: 0 - 5%.
Convention Air spray
Volume of thinner: 0 - 10%.
Brush Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%
Roller Suitable for stripe coat and touch up.
Volume of thinner: 0 - 10%.
Thinner/Cleaner SAM Thinner No. 2
Thinning should only be added after the two components have
been thoroughly mixed.
Pot life 60 min at 25 Cº