Epoxy Primers

Sam Epoxy Holding primer 50

A two-component, polyamide-cured epoxy Primer with excellent anticorrosive properties.

Characteristics

  • Good abrasion and impact resistance.
  • Designed to be used in industrial and marine Environment.
  • Designed to be used over Carbon steel, Stainless steel, galvanized steel and

Aluminum

  • Can be used with water jetting surface preparation.
  • Designed to be used as a holding primer that can be recoated after a period of time.
  • Compatible with well-designed cathodic protection system.

Physical properties.

Colour : Red brown, (specific colours) .

Texture : Flat

Mixing and Application Information

Number of components: Two

Mixing ratio: By Volume, base to hardener: 75 / 25

Specific gravity: Approx. 1.35 g/ml

Volume solids  : 55±2% 

Tested acc. ASTM D 2369

VOC: Approx. 400 g/liter

PRODUCT DATA SHEET

Sam Epoxy Holding primer 50-Plus

A two-component, Polyamine-cured epoxy Primer with excellent anticorrosive properties.

Characteristics

  • Good abrasion and impact resistance.
  • Designed to be used in industrial and marine Environment.
  • Designed to be used over Carbon steel, Stainless steel, galvanized steel and

Aluminum

  • Can be used with water jetting surface preparation.
  • Can be recoated with most mid and high build SAMCO Epoxies.
  • Compatible with well-designed cathodic protection system.

 

Physical properties.

Colour:  Red brown, (specific colours)

Texture:  Flat

Number of components: Two

Mixing ratio :  By Volume, base to hardener: 75 / 25

Specific gravity:  Approx. 1.35 g/ml

Volume solids: 55±2%

Tested acc. ASTM D 2369

PRODUCT DATA SHEET

Sam Epoxy primer 50

A two-component, polyamide-cured epoxy Primer with excellent anticorrosive properties.

Characteristics

  • Good abrasion and impact resistance.
  • Designed to be used in industrial and marine Environment.
  • Designed to be used as a mist/full coat technique on Inorganic zinc rich primers.
  • Can be used over carbon steel and galvanized steel with Excellent workability.
  • Can be recoated with most mid and high build SAMCO Epoxies.

 

Physical properties.

Colour : Red brown, (specific colours) 

Texture : Egg-shell

Mixing and Application Information

Number of components: Two

Mixing ratio:

By Volume, base to hardener: 80 / 20

Specific gravity:

Approx. 1.35 g/ml

Volume solids  : 50±2%

Tested acc. ASTM D 2369

VOC: Approx. 350 g/liter

PRODUCT DATA SHEET

Sam Epoxy primer 65

A two-component, polyamide-cured epoxy Primer with excellent anticorrosive properties.

Characteristics

  • Good abrasion and impact resistance.
  • Designed to be used in industrial and marine Environment.
  • Designed to be used over Carbon steel, Stainless steel, galvanized steel.
  • Designed to be used as a holding primer that can be recoated after a period of time.
  • Can be recoated with most mid and high build SAMCO Epoxies.
  • Compatible with well-designed cathodic protection system.

Physical properties.

Colour : Red brown, (specific colours)

Texture : Flat

Mixing and Application Information

Number of components: Two

Mixing ratio:

By Volume, base to hardener: 80 / 20

Specific gravity:

Approx. 1.35 g/ml

Volume solids  : 65±2%

Tested acc. ASTM D 2369

VOC: Approx. 300 g/liter

PRODUCT DATA SHEET

Sam Epoxy primer ZP- 60

A two-component, polyamide-cured epoxy Primer with excellent anticorrosive properties due to pigmentation by Zinc phosphate pigments.

Characteristics

  • Good abrasion and impact resistance.
  • Designed to be used in industrial and marine Environment.
  • Can be used with water jetting surface preparation.
  • Designed to be used as a holding primer that can be recoated after a period of time.
  • Compatible with well-designed cathodic protection system.

Physical properties.

Colour : Red brown, (specific colours)

Texture : Egg Shell

Mixing and Application Information

Number of components: Two

Mixing ratio:

By Volume, base to hardener: 75 / 25

Specific gravity:

Approx. 1.5 g/ml

Volume solids  : 60±2%

Tested acc. ASTM D 2369

VOC: Approx. 300 g/liter

PRODUCT DATA SHEET

Sam Epoxy primer ZP 75

A two-component, High solid, polyamide-cured epoxy Primer with excellent anticorrosive properties due to pigmentation by Zinc phosphate pigments.

Characteristics

  • Excellent abrasion and impact resistance.
  • Designed to be used in industrial and marine Environment.
  • Can be used with water jetting surface preparation.
  • Can be recoated with most mid and high build SAMCO Epoxies.
  • Compatible with well-designed cathodic protection system.

Physical properties.

Colour : Red brown, (specific colours)

Texture : Egg Shell

Mixing and Application Information

Number of components: Two

Mixing ratio:

By Volume, base to hardener: 75 / 25

Specific gravity:

Approx. 1.5 g/ml

Volume solids  : 75±2%

Tested acc. ASTM D 2369

VOC: Approx. 230 g/liter

PRODUCT DATA SHEET

Sam Epoxy primer ZP- EC

A two-component, high solid, polyamide-cured epoxy Primer with excellent anticorrosive properties due to pigmentation by Zinc phosphate pigments.

Characteristics

  • Good abrasion and impact resistance.
  • Designed to be used in industrial and marine Environment.
  • Can be used with water jetting surface preparation.
  • Designed to be used as a holding primer that can be recoated after a period of time.
  • Compatible with well-designed cathodic protection system.

Physical properties.

Colour : Red brown, (specific colours)

Texture : Egg Shell

Mixing and Application Information

Number of components: Two

Mixing ratio:

By Volume, base to hardener: 80 / 20

Specific gravity:

Approx. 1.45 g/ml

Volume solids  : 65±2% 

Tested acc. ASTM D 2369

VOC: Approx. 300 g/liter

PRODUCT DATA SHEET